Description

Motorized Clothes Hanger — CH Series

The Tono CH Series is a motorized clothes hanger that lowers the full
closet rod to arm level at the touch of a button, then returns it to the
top of the wardrobe when done. It converts unreachable high storage into
fully accessible hanging space — recovering 60 to 100 cm of vertical
capacity in every tall wardrobe.

Part of the Tono
automated closet system range.
Available in 110V and 230V. Three-year warranty. Global shipping.

Key Specifications

The 20 kg rating accommodates approximately 30-40 hanging garments
depending on fabric weight — a full section of shirts, jackets, or
lightweight dresses. For heavier loads or wider cabinet widths, contact
our engineering team to spec a dual-unit installation.

What Is a Motorized Clothes Hanger?

A motorized clothes hanger — also called a pull-down closet rod or
electric clothes rail — is a powered wardrobe fitting that raises and
lowers the hanging rod on command. When retracted, the rod sits at the
top of the tall wardrobe, storing garments in the space that fixed rails
cannot use. When activated, the motor lowers the full rod, garments
included, to chest height.

The result: a two-metre-tall wardrobe delivers twice the useful hanging
capacity, without step stools or reach compromise. Standard installations
recover 60-100 cm of previously unusable vertical space.

Where the CH Series Is Specified

Luxury Residential

Master closets and walk-in wardrobes in premium homes. Integrates with
Crestron, Control4, KNX, Savant. Standard specification for high-end
projects across the UAE, USA, UK, and India.

Hospitality

Hotel suites, serviced apartments, and villa rentals where storage
capacity per square metre directly affects revenue per key.

Premium Modular Wardrobes

Interior designers and modular brands specifying automated fittings as
a differentiator in high-end project bids.

Universal & Accessible Design

Aging-in-place residences and wheelchair-accessible units where
standard closet rods are unusable. The CH Series is frequently specified
in universal-design and accessibility-focused projects.

Compact Urban Apartments

Small-footprint city apartments where vertical space must compensate
for limited floor area.

How the Pull-Down Mechanism Works

The CH Series consists of a motor, a scissor lift mechanism, and a
hanging rod. On activation, the motor lowers the rod smoothly along its
guide to a preset stop height — typically at chest level. When done, one
touch returns the rod to its stowed position.

An auto-stop sensor halts travel instantly on any obstruction — clothing
catching, hands in the mechanism, incorrect load — protecting both the
mechanism and its contents.

Smart-Home Integration

The CH Series supports dry-contact triggers for integration with major
residential control platforms:

• Crestron
• Control4
• Savant
• KNX
• Lutron (via relay)
• Apple HomeKit and Google Home (via bridge)

Voice control, scheduled operation, and app-based triggers are supported
through the connected system. For custom integrations or non-standard
control protocols, contact our engineering team.

Installation and Retrofit

The CH Series installs into new modular wardrobes at build stage or
retrofits into existing wardrobes with compatible internal dimensions.
Standard installation requires a 230V or 110V mains connection inside the
cabinet.

For custom rod lengths, non-standard cabinet widths, or specific
mounting requirements, our engineering team supplies drawings and
installation guidance before order.

Frequently Asked Questions

What is a motorized clothes hanger?

A motorized clothes hanger is a powered closet rod that lowers on
command from the top of a wardrobe to arm level. It converts unreachable
high storage into accessible hanging space without a step stool.

What is the load capacity of the CH Series?

The CH Series supports up to 20 kg of clothing weight — approximately
30-40 garments depending on fabric. An auto-stop sensor halts operation
if an obstruction is detected during travel.

Can the CH Series be retrofitted into an existing wardrobe?

Often, yes. Fit depends on the wardrobe’s internal dimensions, rod
width, and vertical clearance for the mechanism. Send us your interior
dimensions and we will confirm compatibility before order.

Can it be integrated with a smart-home system?

Yes. The CH Series supports dry-contact triggers compatible with
Crestron, Control4, KNX, Savant, and Lutron. Voice control, scheduled
operation, and app-based triggers work through the connected platform.

How noisy is the motor?

Below 40 dB — quieter than a refrigerator compressor. Suitable for
bedrooms, dressing rooms, and hospitality suites.

What happens if clothing catches during travel?

The auto-stop sensor detects unusual resistance and halts the motor
instantly, protecting the mechanism, garments, and contents.

What power supply is required?

Available in 110V (USA, Canada, Mexico, Japan) and 230V (India, UK,
EU, Middle East, Australia, Asia). Custom voltages can be configured.

Does Tono ship the CH Series internationally?

Yes. Ships to the USA, UK, EU, Middle East, Australia, and Asia.
Typical international lead time: 3-6 weeks. Contact us for project
pricing.

What is the warranty?

Three years on motor and mechanism. Extended warranty is available
for commercial and hospitality installations.

Explore the Automated Closet System Range

• DL Series — Motorized Dressing Table
• MM Series — Motorized Mirror Lift
• All motorized wardrobe lifts

Talk to a CH Series Specialist

For specification sheets, CAD drawings, project pricing, and integration
support, contact the Tono team:

India & Asia: co*******@*********ms.com | 1800 209 9534
USA, UK, EU, Middle East: co*******@*********ms.com